IS210AEABH1ABA

About the IS210AEABH1ABA

The IS210AEABH1ABA is a board component made by GE for the Mark VI. This is a turbine management system for steam/gas heavy-duty turbines.  The Mark VI has Input/Output cards that are general purpose and application specific.  The system is designed with both hardware and software limit checking.

The IS210AEABH1ABA is a Thread I/O board.  The board has many types of connectors, including stab-on connectors (P10 through P17,) a header connector (P18,) three jack connectors (P1, P2, and P3,) as well as a D-type cable connector (J1) and two terminal boards (TB1 and TB2.)   Many of these connectors are labeled with both the reference designator and some other kind of information. For example, the stab-on connector P13 is also labeled “COM.”

The  IS210AEABH1ABA has four large relays placed in a single line on the left side of the board (K1, K2, K3, and K4.)  There are four smaller relays placed in a single line on the right side of the board (K5, K6, K7, and K8.) The board has a multi-pin jumper.  It is populated by resistors, transistors, diodes, integrated circuits, LEDs, and capacitors. Capacitors include C188, which is a rotary potentiometer.

The surface of the  IS210AEABH1ABA is marked with codes like 3312, M3 94V-0, and FA/00.  The board has a large chart printed on the bottom left side of the board describing the diagnostic status of LED components.  The board is drilled in all corners for mounting options. There are an additional two factory-made drill holes within the body of the board.