About the IS210DSCBH1A
The IS210DSCBH1A is a printed circuit board or PCB component manufactured by GE for their Mark VI system. The Mark VI is part of GE’s Speedtronic line and was created for the management of heavy-duty gas and steam turbine systems. It features triple modular redundant (TMR) architecture, which means the system is built with three separate and independent Control Modules, IONets, and power supplies. The MKVI also was built as a Simplex system for less complex turbines with single modules. The Mark VI Turbine Control System Series that this IS210DSCBH1A printed circuit board in specific was originally designed and produced for has to be considered a stark upgrade upon the previously-released Mark IV And Mark V Turbine Control System Series of the same name, as these series had more restricted possible functional applications in gas and steam turbine control and management systems alone. This IS210DSCBH1A product's Mark VI Series is seen as an attractive prospect within the greater automated industrial promotional community given its status as one of the final-developed GE product series to utilize the patented Speedtronic control system technology first seen with the rollout of the Mark I Series in the mid to later 1960s.
Hardware Tips and Specifications
The IS210DSCBH1A is a Serial Communication Input/Output terminal board. This compact terminal board is not designed to work with a PSCA I/O pack. It is on-board noise suppression and is built with an onboard ID chip that will identify the board to the VSCA board for diagnostic purposes. Any mismatches of chips may cause a hardware incompatibility fault to occur. The IS210DSCBH1A has a Euro-block terminal strip located on one side of the board. The other edge has a single cable connector (female) with 37 pins. Between these two components, the board is populated with lines of jumper switches (6) marked ‘SCOM,’ a line of capacitors (C2 through C8,) interspersed with resistors (R1 through R6,) and a row of resistors (R7 through 12.) The board has an additional two capacitors located on either side of the cable connector (C1 and C2.)
The IS210DSCBH1A is designed to be DIN-rail mounted and slid into place. It is held by a plastic holder that clamps around all four edges of the board. The board is 3.4 inches by 6.37 inches. AX Control offers a number of programs to help save you money. Please visit the links on this page for more information on exchange credit, selling surplus parts, or our warranty program. Given this IS210DSCBH1A Serial Communications Board product offering's intiial attribution to the Mark VI Turbine Control System Series, it is not considered to exist online with any great amount of originally-printed instructional materials due to past prosecuted infringements. With this being the case, the IS210DSCBH1A Serial Communications Board's IS210DSCBH1A functional product number alone can be identified as a decent primary informational source of IS210DSCBH1A Board hardware detail, as it codes for various qualities through a GE-developed series of consecutive functional naming chunks. For instance. this IS210DSCBH1A functional product number specifically begins with an inclusion of the dual-functional IS210 series tag delegating this IS210DSCBH1A PCB's special modular assembly version as well as its domestic location of original GE manufacture. Some of the other relevant IS210DSCBH1A Board hardware details revealed in this manner include this IS210DSCBH1A product's:
- DSCB functional product acronym
- Conformal PCB coating style
- Group one Mark VI Series product grouping
- A-rated primary functional revision
