Product Description
The IS200AEPGG1A module was created by manufacturer GE Energy; a shell company of major industry retailer General Electric. This model of GE Energy component module was manufactured a a member of the GE Energy Mark VIe Wind Turbine Control series, existing as a relatively recently-added module. In industry circles, the IS200AEPGG1A printed circuit board may be referred to simply by its shortened functional acronym of AEPG. This module is considered a modified version of the original IS200AEPGG1 parent board; boasting a singular significant revision sitting at an "A" rating.
Hardware Tips and Specifications
This IS200AEPGG1A module is a rather small, component-bare GE Energy component module, and a lot of original factory-issued instructional manuals detailing the product are not available on the internet. With that being said, it is somewhat surprising how much information surrounding the IS200AEPGG1A can be sourced from a simple visual inspection and IS200AEPGG1A part number breakdown. In visual inspection, a primary noticeable hardware trait for the IS200AEPGG1A can be immediately identified in its dual selection of wires creating a circuit looping over this printed circuit board's base board. These wires seem to extend from the device's sole functional plug, labeled by the standard factory-printed nomenclature P1, to another available port on the base board of this AEPG model, this one labeled with the factory-printed HW1. These two connector cables are labeled "B" and "W," seemingly referring to the black and white colorations of each respective wire. While labeled as "B" and "W" on the HW1 port affixed to the IS200AEPGG1A model PCB's base board, these two wires are given the nomenclatures 1 and 2 respectively, on their P1-labeled port.
A second piece of hardware crucial to the miniature assembly of this IS200AEPGG1A board can be found in its singular fuse, fittingly labeled FU1. This fuse seems to make use of a singular diode for additional voltage protections support. Beyond this fuse, as well as the previously-mentioned circuit assembly involving B and W cable connectors, no other real components exist attached to the base board of this IS200AEPGG1A model. While this is true, a number of design elements standard to most GE Energy Mark VIe Wind Turbine Series products are consistent with this model, including two factory-drilled holes for installation purposes, as well as a series of other unmentioned factory-printed nomenclature labels. Some of the other labels present on the base board of this IS200AEPGG1A model include:
-
A "FVI" printed label on the back of the PCB
-
The IS200AEPGG1A part number
-
Label 4817-8
-
The ET156 label
-
A standard-issue barcode label
While a number of hardware elements important to the normative function of this IS200AEPGG1A board and its greater drive assembly are revealed solely through a diligent visual inspection, a ton of other relevant information is retrievable from a breakdown of the functional IS200AEPGG1A product number. The IS200 series tag present at the very beginning of this number details this part's allegiance as a domestically-produced General Electric component, and the trailing "A" digit in the IS200AEPGG1A part number reveals this part's singular functional revision. Before making a purchase decision for this product, please keep in mind that its singular A-rated functional revision may make drastic improvements or changes to the performance specifications and dimensions of the IS200AEPGG1A printed circuit board and its greater Mark VIe Wind Turbine drive assembly.
