6KLP21003X9A1

About the 6KLP21003X9A1

6KLP21003X9A1 is an AF-60LP Micro Drive that is manufactured by GE. This particular 1-phase drive has an input voltage of 208/230 volts. The horsepower rating is 3 HP. Options for the AF-60LP Micro DRive include the keypad potentiometer, the remote mounting kit for the keypad (3m cable included), the de-coupling plate kit for unit sizes M1-M5, the NEMA Type 1 kit for unit sizes M1-M5, and the DIN rail mounting kit for unit size M1. GE line filters and brake resistors are available upon request. The special conditions on the drive involve derating the drive for the ambient temperature, for low air pressure, and for running at low speech.

There are 2 analog inputs on the drive at terminals 53 and 60. The voltage level of these inputs is 0-10V, the input resistance is 10KΩ, the maximum voltage is 20V, the current level is 0 / 4 to 20 mA (scalable), and the maximum current is 30 mA. There is 1 programmable analog outputs on the drive at terminal 42. The current range at the analog output is 0 / 4 to 20 mA. The maximum resistor load to common at the analog output is 500 Ω. The accuracy of the analog output is 0.8% of the full scale. The resolution on the analog output is 8 bit. On the mains supply the supply frequency is 50/60 Hz. The maximum imbalance temporary between mains phases is 3.0% of the rated supply voltage. The true power factor is greater than or equal to 0.4 nominal at rate load. The environmental rating according to EN60664-1 is overvoltage category III and pollution degree 2.