6KFP23002X9XXXA1

About the 6KFP23002X9XXXA1

6KFP23002X9XXXA1 is a fan and pump drive that is manufactured by GE for the AF-600 series. The horsepower rating is 2, the kW rating is 1.5, the rated output amps are 7.5, and the overload amps at 110% for one minute are 8.3. This unit includes an IP20 chassis and a keypad. The input power is 230 VAC. All cabling must comply with local and national regulation codes. Always use proper fusing that is made according to local regulation. Twisted screen ends spoil the screening effect at high frequencies. The screen must be continued on the lowest possible HF impedance if it is necessary to break the screen to install a motor isolator or motor contactor. Connect the motor cable screen to both the frequency converter de-coupling plate and to the motor’s metal housing.

When earthing, keep the earth wire connections as short as possible. Appropriately earth the frequency converter for safety reasons because of the high leakage current. ELCB relays, multiple protective earthing can be used as extra protection, provided that local safety regulations are complied with. A bad electrical connection results from a tightening torque that is too-tight or too loose. Protection for the supply side in case of component breakdown inside the drive involves the use of fuses and/or circuit breakers. These protections include short-circuit protection, over current protection, and branch circuit protection. The recommended fuse sizes and circuit breakers are detailed in the AF-600 drive manual. Contact AX Control for a price quote.