About the 6KFP23020X9XXXA1
6KFP23020X9XXXA1 is a fan and pump drive that is manufactured by GE for the AF-600 series. The horsepower rating is 20, the kW rating is 15, the rate output amps are 59.4, and the overload amps at 110% for one minute are 65.3. This unit includes an IP20 chassis and a keypad. The input power is 230 VAC. On the input power supply, the maximum voltage imbalance is 3% of the rated supply voltage, the true power factor is greater than 0.9 of nominal at the rated load, the displacement power factor is 0.98, the switching on input power supply is 7.5 kW. The rated output voltage is 0-100% of the supply voltage. The output frequency is 0-590 Hz. The switching on output is unlimited. The acceleration and deceleration times are 1-3600 seconds.
Getting started with the drive involves mechanical installation (mechanical mounting), electrical installation (connection to mains and protecting earth, motor connection and cables, fuses and circuit breakers, control terminal cables), and quick setup (keypad, autotune, programming). Installing the frequency convertor requires the following tools: a 10 or 12 mm drill, a tape measure, a wrench with relevant metric sockets (7-17 mm), wrench extensions, a sheet metal punch, a lifting bar, a crane, and an A Torx T50 tool. The frequency converter complies with requirements that exist for units mounted on the walls and floors of production premises, as well as in the panels bolted to walls or floors. The frequency converter allows for energy savings and better control of the flow and pressure of the system.
