Frequently Asked Questions about 7V0BS002PK02
What does the error number ER13 mean?
The error number ER13 may also be called ORBUF is received when the buffer has an overflow. Baud rates are set incorrectly. When the protocol is set incorrectly, or the incorrect RS232 or RS422 hardware is configured.
What does error code ER14 mean?
Error code ER14 also called CKSUM appears when the incorrect checksum was received. The Baud rates were incorrectly set. The protocol was incorrectly set or the incorrect RS232 or RS422 hardware was configured.
What does error code ER15 mean?
Error code ER15 also called BDMSG stands for BAD MESSAGE. The "start of transmission" byte was not received. The Baud rates were not properly set. The protocol set was incorrect on an external device (1 start bit, 8 data bits, and 1 stop bit). The hardware configuration is incorrect, or the incorrect RS232 or RS422 hardware configuration was used.
