6KAF323002M$A1

About the 6KAF323002M$A1

The General Electric Fuji Electric 6KAF323002M$A1 is a 2 horsepower drive.  This is one of several Fuji variable frequency drives (VFD) available in our inventory. An AF-300 Micro-$aver drive, this 3 phase controller inputs 230 Volts and can output 230 Volts with a frequency range of 0.2-400Hz. The unit pairs an automatic voltage regulator function with a Pulse Width Modulation (PWM) Scalar power control to optimize both part use and part life. The measured Output Current Carrier Frequency is 6.0 while in low and 7.0 while in high.

As the drive is encased in a NEMA 1 enclosure it is only suitable for installation indoors. The entire drive measures 6.3in (H) x 5.6in (W) x 5.2in (D) and weighs 3.5 pounds. To offer easy access to the controls and power wiring, the front cover of the drive can be removed by loosening the mounting screws securing it to the drive.

Featured on the front of 6KAF323002M$A1 is a keypad panel with a four-digit digital display and six dual function keys. The panel allows the operator to program and operate the drive. The keys included on the panel are a Program (PRG) key, a Function key (Data Key), Up/Down keys, a Stop key (Reset key), and a Run key.

Drive storage is paramount to maintaining the integrity of the drive. The facility that houses the drive should maintain an ambient temperature between -10℃ and 50℃, or 14℉ to 122℉. If the temperature should exceed 40℃, or 104℉, then be sure to remove the ventilation cover to avoid drive damage. Proper safety and installation instructions are in the corresponding manual noted on the nameplate.