DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
AVAILABILITY:
IN STOCK
SHIPS IN 3-5 DAYS
The General Electric Fuji Electric 6KAF323002MSA1 is a 3 phase drive from the AF-300 Micro-$aver series. This 2 horsepower drive is capable of inputting 230VAC and outputting 230VAC with a frequency range of 0.2-400Hz. A Pulse Width Modulation (PWM) Scalar power control pairs with an automatic voltage regulator function to ensure device output and longevity. While operating on low, the Output Current Carrier Frequency is 6.0, while operating on high it measures 7.0.
A keypad panel with a four-digit digital display and six dual function keys are featured on the front of the drive. The keys include a Program (PRG) key, a Function key (Data key), Up/Down keys, a Run key, and a Stop key (Reset key). This panel gives the user access to program and operate the drive.
Housed in a NEMA 1 enclosure, the drive is only suitable for indoor installation. Measuring 6.3in (H) x 5.6in (W) x 5.2in (D) and weighing only 3.5 pounds, making the unit rather compact. The front cover of the drive is easily removable giving access to the controls and power wiring. This is a VFD variable frequency drive.
It is imperative that the drive be stored and handled properly to maintain the integrity of the device. The ambient temperature of the facility housing 6KAF323002MSA1 should hold between -10℃ and 50℃, or 14℉ and 122℉. Should the temperature raise higher than 40℃, or 104℉ remove the ventilation cover to avoid overheating. All safety and installation instructions can be found in the corresponding manual.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $966 |
Our highly skilled technicians can repair your 6KAF323002MSA1. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved