About the 6KE1123F50X1A1
The 6KE1123F50X1A1 is from Fuji Electric. This is a 230 VAC, 3phase 50/60Hz input drive with ½ horsepower and weighs just under three pounds. The drive has an overload of 3.8 and an output current of 2.5. The Ambient temperature for this drive should be between -10 to +50°C (+14 to +122°F). The storage temperature for this drive should be between -25 to +65°C (-4 to +149°F). The should be installed or stored in places that are not subjected to abrupt temperature changes or condensation or freezing. The Atmospheric pressure during storage should be between 86 to 106kPa. The atmospheric pressure during transportation should be between 70 to 106kPa. The general atmosphere for storage and while the drive is in operations should be free of dust, corrosive or flammable gases, oil mist, vapor, water drops or vibration. The drive must also stay out of direct sunlight. Before operation ensure that all cables are connected properly. Ensure that the drive is properly grounded. Check for any loose terminals, screws, and connectors. Make sure there are no short circuits between terminals and exposed live parts or ground faults. Check to see if the motor is separated from mechanical equipment. Turn the switches off so that the drive doesn’t start or operate at power-on. For information on how to set up this drive, troubleshoot any issues or further information, please refer to the AF-300 E11 user’s manual. This manual is published by Fuji Electric.
The professional staff at AX Control is here to assist you via email or by phone.
