About the 6KES243002X1A1
The 6KES243002X1A1 is a 460 VAC drive from Fuji Electric and may also be referred to with the part number, 6KE$243002X1A1. Do not install in any location subject to direct sunlight, dust, corrosive gas, inflammable gas, or oil mist. The drive should be installed at an elevation below 1000 meters (3281 feet). The drive has a constant and variable torque value of 2.5 in the output current. The output power KVA is rated at two. The output power KW is rated at point seven five (0.75). The constant torque efficiency % at 2K Hz is ninety-three point three (93.3). The efficiency % at 15K Hz eighty-eight. The watts lost at 2K Hz is fifty and the watts lost at 15K Hz is ninety. The drive has an internal DB of sixty-eight. The relative humidity is between 20% and 90%. Avoid any location subject to condensation, freezing, or where the drive would come in contact with water. The drive can only be installed indoors, and the ambient temperature is between -10°C and +50°C (+14° F to +122°F). (Remove the ventilation cover when the temperature exceeds +40°C [+104°F].) Installation above 1000 meters (3300 feet) will need to be derated 1% per 333 feet. Caution: The mounting wall for the drive must be constructed of heat resistant material because, during operation, the temperature of the Inverter's cooling fins rises to approximately 90 degrees C (194° F). The drive has a consistent torque Hp rating of two, a consistent torque rated output amps of three point seven (3.7). The drives dimensions are 10.24 (H) x 5.91 (W) x 5.71 (D) in inches and weigh 8.4 pounds.
