6KF11H037X1A1

About the 6KF11H037X1A1

Fuji Electric is the manufacturer of the 6KF11H037X1A1. The 6KF11H037X1A1 is a motor control panel. This panel is twenty-two pounds. The panel has a rated output current (A) is thirty-seven, the panel has one NEMA enclosure, with an overload rating (110% for one minute) of forty-one. The panel has a twenty-five horsepower rating. Securely fasten the product in an upright position on a solid structure with the tag AF-300 F11 facing the front. Do not turn the product upside down or install in a horizontal position. Fig. 2-2-1. 2. Since heat is generated during drive operation, the spaces shown in Fig. 2-2-1 are required to ensure sufficient cooling. Do not install the product beneath a device sensitive to heat as heat radiates upward. 3. The heat sink may reach a temperature of 90°C (+194°F) during drive operation. Ensure that the material surrounding the product can withstand this temperature. WARNING Install this product on nonflammable material such as metal. 4. When installing this product in a control panel, consider ventilation to prevent the drive’s ambient temperature from exceeding the specified value. Do not install the product in an area from which heat cannot be sufficiently released. 5. If two or more drives must be installed in the same device or control panel, arrange the units horizontally to minimize the effect of heat. If two or more drives must be installed vertically, place an insulated plate between the drives to minimize the effect of heat. 6. When shipped from the factory, drives provide internal cooling inside the panel. A drive of 6KF11L080,6KF11H044 and below can be converted to external cooling simply by adding an optional mounting adapter.