6KG1123F50X4B1

About the 6KG1123F50X4B1

The 6KG1123F50X4B1 is a NEMA 4, 230 VAC, 3 phase, 50/60Hz input created by Fuji Electric. When installing this drive make sure the heat sink may reach temperatures of ninety degrees Celsius or one-hundred- and ninety-four-degrees Fahrenheit, ensure that the materials around the heatsink can withstand those temperatures. When installing the drive ensure that it is properly grounded. Ensure that the power supply wires are connected correctly and not attached to any of the output terminals. Check for any type of short circuits and ground faults between the terminals and other sections that are under power. Check for any loose screws, connectors, or terminals. Turn off switches before turning the power on to ensure that the drive will not start or operate abnormally at power-on. Once the power is on check that there are no alarm messages on the keypad display. During operation, a visual inspection for abnormal operation can take place externally without removing the covers. The inspection should cover the following areas: (1) The performance, according to standard specifications, is as expected. (2) The environment conforms to standard specifications. (3) The keypad panel display is normal. (4) There are no abnormal sounds, vibrations, or odors. (5) There are no indications of overheating or discoloration. The AF-300 G11 is the manual to reference for this drive. This manual lists all the details for this drive including installation instructions, safety procedures, programming information, etc.

If you would like a quote or additional information please reach out to AX Control by phone or email.