6KG1143001X1A1

About the 6KG1143001X1A1

The 6KG1143001X1A1 from Fuji Electric’s AF-300 G11 series. The 6KG1143001X1A1 is a 460 VAC 3 phase, 50/60 Hz input, NEMA 1 drive. This drive has one horsepower. The drive has a 2.5 rated output current (A), the rated output power (KVA) is 1.9, with a 3.8 overload (150% for 1 min.) and weighs 5.5 pounds. The efficiency at2KHz (%) is 95.4. The efficiency at 15KHz (%) is 91.7. The watts lost at 2KHz (W) is 45. The watts loss at 15KHz (W) is 85. The internal DB (W) is 10. For safety when connecting the main circuit power terminals (L1/R, L2/S, L3/T) 1. Connect these terminals to the power supply via a molded-case circuit breaker or ground-leakage circuit breaker for circuit protection. Phase-sequence matching is unnecessary. 2. To ensure safety, a magnetic contactor should be used to disconnect the drive from the power supply when the drive protective function activates. 3. Use control circuit terminal FWD/REV or the RUN/STOP key on the keypad panel to start or stop the drive. The main circuit power should be used to start or stop the drive only if absolutely necessary and they should not be used more than once every hour. 4. If you need to connect these terminals to a single-phase power supply, please contact the factory. Please refer to the AF-300 G11 series instruction manual for additional information about the drive and how to operate it.

The friendly and knowledgeable staff at AX Control is ready to assist you by phone or email.