6KG1143001X1B1

About the 6KG1143001X1B1

The General Electric Fuji Electric 6KG1143001X1B1 is a 1 horsepower drive belonging to the AF-300 G11 series. This 3 phase controller can input 460 Volts with a frequency of 50/60Hz and it can output 380-460 Volts with a frequency range of 0.1-400Hz. The rated output current of 6KG1143001X1B1 is 2.5 Amps. A factory installed keypad panel is featured on the front plate of the drive.

Housed in a NEMA 1/ UL Type 1 enclosure, the unit measures 10.24in (H) x 4.33in (W) x 5.71in (D) and weighs 5.5 pounds. The front plate is easily detachable. By loosening the two mounting screws securing it to the panel, the front plate can be removed from the drive. After removing the front plate, the keypad panel can also be removed by loosening the other two mounting screws.

Storage requirements are an integral part of maintaining the machine. Properly insulating the drive will keep moisture and condensation from corroding the unit’s capacitors. The temperature of the facility should range between -10℃ and 50℃, or 14℉ to 122℉. If the temperature of the housing facility raises above 40℃, or 104℉, then the ventilation covers must be removed to prevent the drive from overheating.

All safety precautions should be followed when installing the drive to prevent accidents or fires. 6KG1143001X1B1 should be installed in an area free of floating debris. If trapped behind the unit, floating debris poses a fire hazard as the heat sink can reach temperatures of 90℃, or 194℉. All safety and installation instructions are found in the manual that is referenced on the name plate.