6KG1143010X4B1

Product Description

The 6KG1143010X4B1 is an AF-300 G11 Fuji Electric 10 HP Drive. The 6KG1143010X4B1 has a 380-480 VAC, 23.5 amp, 50/60 HZ, 3-phase input. It also has a 380-460 VAC, 0.1-400 HZ, and 18 amp output.

The 6KG1143010X4B1 is protected by a NEMA 4 type enclosure. This drive is 10.24” tall, 8.66” wide, and 7.68” thick. It weighs right around 14.3 lbs. The front cover on the drive can be removed by loosening the cover mounting screws and then pulling the cover from the top to remove it. The keypad may also be removed from the front cover and replaced.

It has a factory-installed user interface that has a 4-digit 7-segment LED display, an LCD display with LED indicators around it, and a 9 button keypad. The LED indicators and LCD user interface display will give the user information about the drive status, issuing commands to the drive, and information about detected system faults. The buttons on the keypad are labeled PRG, FUNC/Data, Shift >>, Reset, Stop, REV, FWD, and two up/down arrow buttons. On the top of the unit is an air circulation fan that forces air to the internal drive components. On the bottom of the unit are two large black cylinders that are mounted next to three large circular wire and cable openings. There are brackets on the back of the drive that allows it to be mounted onto a flat metallic surface. Because this drive is less than 30 HP it can be mounted side-by-side with other low HP models, but it does need a 4” clearance above and below it.