About the 6KM$223F50N1A1
The 6KM$223F50N1A1 is an AF-300M$ II Fuji Electric Micro 0.5 HP Drive. It was initially created to be a part of the AF-300 Micro-$aver II series.
The 6KM$223F50N1A1 has input ratings of 200-230 VAC, 50/60 Hz, 4.7 amps, and is 3-phase. It has output ratings of 200-230 VAC, 0.2-400 Hz, 3 continuous amps, and a 4.5 maximum amperage for 1 minute. It has a U-V-W rotation. It weighs roughly 2.9 lbs. It is 158 mm tall, 109 mm wide, and 90 mm thick. It uses a 10-amp fuse. It is in a NEMA 1 type of enclosure that requires an indoor-only mounting. It is only suitable for elevations that are less than 1000 meters with a relative humidity of 20-95%. It should be kept far away from corrosive gas and oil mists.
The faceplate of the 6KM$223F50N1A1 has a small user interface that has a keypad and display. The display is a 7-segment 4-digit LED indicator. That will alert the user to various faults within the drive, producing fault codes that can be looked up in the user manual. There are 5 LED indicators on the display that indicates panel control, the program mode (Hz, amps, and volts) and a run mode. There are 6 keys on the keypad. These are labeled Run, Stop, FUNC/Data, PRG/Reset, and two up/down arrow keys. This drive does not come with an external fan assembly. It has a convection type of cooling method. It has a detachable front cover that can be removed by loosening and detaching the screws on the faceplate.
Fuji manuals and user guides will provide you with additional details.
