Frequently Asked Questions about 6KMS223002N1A1
Who makes the 6KMS223002N1A1 drive?
The 6KMS223002N1A1 drive is made by Fuji Electric.
Does the 6KMS223002N1A1 drive belong to a series?
Yes, the 6KMS223002N1A1 drive is a part of the AF-300 Micro-$aver II series produced by Fuji Electric.
What does it mean if the 6KMS223002N1A1's display is flashing?
If the 6KMS223002N1A1's display is flashing it indicated that a "run" command is not present and one needs to be entered.
What does it mean if the 6KMS223002N1A1's display is solid?
If the 6KMS223002N1A1's display is solid it indicates the actual output when the drive is running.
What are the next steps after the 6KMS223002N1A1 drive is wired up and mounted?
Before applying AC power to the 6KMS223002N1A1 drive double check that the wiring is accurate, with no wiring chips or screws remaining in the drive. Check to make sure that all terminal connections and screws are secure and tightened down. Confirm that there are no touching terminals or exposed wires. When this is complete AC power can then be applied to the 6KMS223002N1A1 drive. When the AC power is applied to the 6KMS223002N1A1 drive the keypad panel's display will flash on and off. If the RUN key is pressed the drive will operate at the settings or Function Code programmed by the factory of sixty (60) Hertz. To reprogram the 6KMS223002N1A1 drive to fit your systems requirements use the Program RESET key on the keypad panel to direct you to the proper screen to enter your programming data. The arrow keys will also allow for ease of navigation while programming the drive.
