Frequently Asked Questions about 6KP1123015X1B1
How do you start or stop the 6KP1123015X1B1?
To start or stop the 6KP1123015X1B1 use the RUN or START button to start the drive, and the STOP button to stop the drive. Do not start or stop this drive by using the main power circuit. Doing so could result in drive failure.
Can you get burned by the 6KP1123015X1B1?
Yes, a burn could happen if you touch the 6KP1123015X1B1's braking resistor or the heatsink. These items get very hot during drive operation.
Should there be any space around the drive when installing it?
Yes, the 6KP1123015X1B1 needs to have space around it to allow for proper air flow to cool the drive down. There should be at least four (4) inches or one hundred (100) millimeters at the top and the bottom of the drive. The sides can be a zero (0) because side by side installation is okay.
What does the LCD monitor show?
The LCD monitor on the 6KP1123015X1B1 shows the various bits of information regarding the drive's performance and operation. Around the screen (on the top and the bottom) are little indicators of what is shown on the LCD monitor. The LCD monitor also has a backlight component that allows the worker to easily see the screen and the controls being put in. The LCD monitor also has status indicators on it that displays the current operating status. The status indicators are FWD: for forward operation, REV: for reverse operation, and STOP: for the operation of the drive being stopped.
