About the 6KXC111F12X9A1
The 6KXC111F12X9A1 is a GE AF-300 Mini Drive. It corresponds to Fuji Model number FRN0.1C1S-6. This unit is built with an IP20 enclosure and is a single phase 115 VAC 50/60 Hz ⅛ HP drive. The unit does include a keypad.
The 6KXC111F12X9A1 weighs approximately 1.3 pounds before shipping materials are added. It is 4.72 inches high by 3.15 inches wide by 3.94 inches deep. The unit has a rated output current of 0.7 amps with a rated overload of 1.1 amps (150%).
The 6KXC111F12X9A1 is designed for use indoors where the ambient temperature is -10 to +50 degrees C in non-condensing humidity of 5 to 95%. The drive should only be used in locations where the temperature remains steady and does not suddenly change in such a way that condensation may form. Do not use in locations where the drive may be subject to moist dust, dirt, or cotton waste that could clog the internal heat sink. Since this heatsink may rise to temperatures of 90 degrees Celsius during operation, the unit should be mounted to materials that can withstand temperatures of those levels. The 6KXC111F12X9A1 requires clearance of four inches top and bottom and 0.4 inches left and right to ensure proper air circulation.
When wiring the 6KXC111F12X9A1 it is important to note the main and control circuit terminals require a tightening torque of 10.6 lb-inches. Be sure ground wires are connected properly to avoid possible fire or electrical shock. For additional safety information please refer to GE/Fuji manuals and user guides that refer to this model.
