Product Description
Fuji Electric is the creator of the 6KXC121F12X9A1 which can be found in the AF-300 Mini line. This drive is small with only 1/8 of a horsepower rating and weighing only a pound. The drive has a 0.8 rated output current and a 1.2 overload. 4. Running the Motor Running the motor for a test perform an inspection and Preparation Prior to Operation. Check the following prior to starting operation. (1) Verify correct connection. Carefully verify that the motor power cables are connected to drive output terminals U, V and W and that the ground cable is connected to the ground electrode correctly. WARNING • Do not connect power supply wires to the drive output terminals U, V, and W. Otherwise, the drive may be damaged if you turn the power on. • Be sure to connect the ground leads of the drive and the motor to the ground electrodes. Otherwise, electric shock may occur. (2) Check for short circuits between terminals and exposed live parts and ground faults. (3) Check for loose terminals, connectors, and screws. (4) Check if the motor is not connected to a driven load. (5) Turn all switches off so that the drive does not start or operate erroneously at power-on. (6) Check that safety measures have been taken against runaway of the system, e.g. a defense to protect people from unexpectedly approaching your power system. For additional details and information about this drive, please refer to the manual by Fuji Electric titled AF-300 Mini startup guide.
