About the 6KXC143005X9A1
Fuji Electric is the manufacture of the 6KXC143005X9A1 which falls into the AF-300 Mini-series. This is a five-horsepower drive that weighs about five pounds. The dimensions for this drive are 7.09 (H) x 5.51 (W) x 5.47 (D) in inches. This drive features an IP20 enclosure and has a rated output of nine and an overload of thirteen point five. The face of this drive has a four-digit (seven segments) LED monitor which is used to display the drives running status, data settings and the alarm status, depending on which operating mode the drive is in. There is a small white potentiometer that is used to manually set frequency and auxiliary frequencies one and two or PID process commands. The RUN key (which is green in color) is to start running the motor. The STOP key (which is red) is to top the motor from running. The Up and Down keys are used to select the setting items and change the function data displayed on the LED monitor. The Program / Reset key is used to switch the operation mode of the device. Pressing this key in Run mode switches the drive to Program mode and vice versa. In Alarm mode, pressing this key after removing the error factor will switch the drive to Run mode. The Function / Data key is used in RUN mode to switch the information displayed (output frequency (Hz), current (Amps) or voltage (V)). If this key is pressed in Program mode will display s the function code and sets the data entered using the ^/˅ keys or the POT. Pressing this key in Alarm mode displays information concerning the alarm code currently displayed on the LED monitor.
