IC210CBL001

About the IC210CBL001

IC210CBL001 is a Durus Programming cable that connects a DURUS controller to a PC. This cable was produced by GE Fanuc Automation and by GE as part of their DURUS series. It has since been discontinued by both manufacturers and is considered to be obsolete.

The IC210CBL001 is a programming cable that is meant to connect to a PC to the DURUS Controller (RS-232). This cable can also serve as part of unit IC646DUR101 which includes the cable and DURUS Programming and Simulation software. The Primary programming languages used on the DURUS Controller is Ladder and Function Block. The IC210CBL001 can also be used to plug into an optional Memory Pack. The memory pack can then plug directly into the controller and transfer programs between modules.

This tan cable has a male end RJ plug that attaches directly to PC circuit board jack and an L shaped or rectangular encased connector (depending on the manufacturer) that plugs into the RS-232 DURUS controller. The cable weighs between 0.24-0.28 lbs.

Both GE and GE Fanuc sell a variety of DURUS products that are compatible with the IC210CBL001 or IC646DUR101. For more material about the configuration of DURUS products, please refer to the Installation and Operation Manual made by GE Fanuc (D-3899-1).

If you are having issues determining the compatibility of this product with your system, please contact AX Control and one of our knowledgeable staff members will be more than happy to help you. Please contact us to request a quote, request a repair, or sell us your surplus IC210CBL001s.