IC210CBL002

About the IC210CBL002

The IC210CBL002 unit is a PDA to Durus Programming Cable that was designed and manufactured by GE Fanuc Automation. The IC210CBL002 cable was created to be included under the Durus series of controllers and controller related accessories.

The IC210CBL002 cable is designed to connect a PDA to a Durus Controller. Do not confuse this cable with the IC210CBL001 cable, which is used to connect a PC to a Durus Controller. Follow the link to find the IC210CBL001 cable on AX Control’s website, if that is the one you need instead.

The IC210CBL002 cable is primarily used for both data synchronization and telemonitoring. When used with one of the Durus Controllers, the IC210CBL002 cable can be used to install some software packages from the PDA. Inside the cable, there is a small internal circuit board that is used to provide the Durus Controller the cable is connected to with a +5 VDC power supply.

The IC210CBL002 cable is easily installed in both the PDA and the Durus Controller, just plugging into both of the devices. No driver is necessary. The IC210CBL002 cable is adapted with both the DC and AC versions of Durus Controllers.

The IC210CBL002 cable is fairly large and heavy for a cable, weighing in at approximately 3.00 lbs. or 1.36 kg. This total, however, does not include any of AX Control’s packaging materials, which are specifically designed to protect your package from any of the bumps and falls that can occur during the shipping and handling process.