About the IC210DDR112
IC210DDR112 is part of the Durus-12 series of GE Fanuc Automation controllers. Motion requires 1 KHz of input. This 12 point, 12VDC controller is expandable and has an LCD screen and a keypad. This part has 2 analog inputs, and the specifications are (6) 12VDC input and (4) output with a relay of 8 amps.
This controller must be installed away from areas with volatile oil gas, organic solvent, ammonia, or electrolyte gas. Do not install the controller in an area with poor ventilation, near a heating source, or in direct sunlight. IC210DDR112 should not operate in ambient temperatures of above 55 degrees Celsius, in relative humidity outside the range of 5-90%, or in areas with excessive dust, salt, or iron powder. Do not subject the controller to frequent vibration and impact or to flammable gasses.
Explosion Warning: The user must turn the power off before disconnecting the equipment, unless the environment is nonhazardous. The user must turn the power off before replacing of wiring modules in hazardous locations. Do not substitute components that impair the controller’s suitability for Class 1, Division 2.
The user must install an emergency-stop circuit, a protection circuit, and an operation circuit for high-voltage components. These external protection devices are essential for proper operation of the controller. Panel-mount the controller to provide greater resistance to mechanical vibration and shock. If the user is not concerned with an environment where high mechanical vibration and shock are present, the controller may be mounted on a DIN rail.
