About the IC210NAR010
The AC controller IC210NAR010 is manufactured by GE Fanuc Automation as part of their Durus-10 series. New Durus plus controllers such as this one require programming software 3.0 or above. This controller is not expandable and does not have a plastic case.
IC210NAR010 has no analog inputs or outputs, and no expansions are supported. The power supply power consumption is 90 mAmps and the user program logic memory is 200 rungs and 99 blocks. The lifecycle status is mature, and the input power voltage is 85 to 240 VAC and 85 to 240 VDC. The output control voltage is 250 VAC/30 VDC relay outputs with an 8A resistive and isolated load. The dimensions are 72 mm x 90 mm x 58 mm. The physical I/O maximum is 34. This 10 point controller has 6 AC inputs, 4 isolated relay outputs (8 amperes), and requires AC input power.
Durus controller modules can be identified in the following ways: “IC210” indicates that the controller or module is part of the Durus family. The following letter signifies the controller type, wherein “D” is expandable with an LCD screen and keypad, “B” is expandable without an LCD screen or keypad, and “N” is not expandable and without a cover, LCD screen, or keypad. The second letter signifies the power source, wherein “A” is 24VAC and “D” is 12VDC. The third letter signifies the output type, wherein “R” is relay and “D” is transistor. The first number that follows the series of three letters signifies the voltage of the DC power source, wherein “0” is 24V and “1” is 12V. The last two numbers signify the total point count for the controller.
