About the IC300ADC110
The IC300ADC110 device is a +/- analog input module that was made to be included within the SmartStack series of modules. The SmartStack series was created by GE Fanuc. The IC300ADC110 analog input module will usually be seen within our stock here at AX Control. You can verify this module’s status inside of our stock by using our website or by giving us a call during our weekday business hours.
The IC300ADC110 analog input module has four analog inputs and four channels. The input ranges for the IC300ADC110 analog input module, which includes the module’s overrange, is 0 through 10.23 VDC and 0 through 5.11 VDC. The input impedance is 10 MΩ < 12 VDC or 6 MΩ > 12 VDC nominal. The IC300ADC110 analog input module’s maximum overvoltage is 350 VDC and the required steady state power is 0.9 W, 4.1 mA at 24 VDC. Related to that, the power budget requirement is internally determined at 35 mA. The IC300ADC110 analog input module uses the successive approximation converter type and the conversion time is determined by the PLC scan time. This module has digital filtering, but it does not have any sort of compatible external power supply that can be used along with it.
For preliminary configuration procedures, you will need to select the I/O tab. This tab provides the information on the I/O registers, all of which are assigned to the module and wherever the module is located on the point map. The I/O map is determined by the model number, which is IC300ADC110. Keep in mind that the I/O map cannot be edited by the user.
