About the IC300DAC202
The IC300DAC202 unit is a SmartStack analog output module that can be either 0-10 V or 0-20 mA. The IC300DAC202 analog output module was developed by GE Fanuc. The IC300DAC202 analog output module will, most of the time, be seen inside of the inventory at AX Control. Our website will tell you if the IC300DAC202 analog output module, or any other product we have listed, is currently in our stock.
The IC300DAC202 analog output module has eight channels and eight analog outputs. This device has a current output range of 20.47; clamped at -0.5 to 33 VDC nominal. The current output voltage compliance is at a range between 4 through 30 VDC and a voltage output range of between 0 through 10.23 V; clamped at -0.5 to 11 VDC nominal. The required steady state power for this module is rated at 0.48 W, 20 mA at 24 VDC, although there is no external power supply that can be connected to this device. At 25 degrees Celsius, the maximum error is full scale at 0.05%. Related to that, the operating temperature should be between 0 degrees Celsius and 60 degrees Celsius.
The status of the I/O can be monitored using the Cscape software. The Model Setup tab will be used in applications where changing the default value of the outputs whenever the controller is set in STOP mode is needed. This tab can also allow the operator to set each output to a specific value or to hold the last value. In general, however, most applications will use the default settings.
