About the IC300DIM410
The IC300DIM410 unit is a 12/24 VDC input module that was produced by GE Fanuc as part of the line of various types of modules known as SmartStack. You will usually be able to find this device in our inventory here at AX Control, which you can check at any time by using our website.
The IC300DIM410 input module has 32 inputs and 6 commons. The inputs are bidirectional with an input impedance of 10 kΩ. This device has an input voltage range of 12 through 24 VDC, but the maximum voltage can be as much as 35 VDC. The isolation voltage, meaning both common to common and common to channel, for the IC300DIM410 input module is rated at 500 VDC. The required power rating at both inrush and steady state is 0.24 W, 10 mA at 24 VDC.
When ON, the minimum voltage level for the IC300DIM410 input module is 9 VDC and the minimum current level is 1 mA. When OFF, the maximum voltage level is 3 VDC and the maximum current level is 200 μA. Related to these ON and OFF ratings, the ON to OFF response and the OFF to ON response times are exactly the same at only 1 ms.
The operating temperature and the relative humidity ratings for the IC300DIM410 input module are similar to the other modules within the SmartStack family. The operating temperature should be anywhere between 0 and 60 degrees Celsius and the relative humidity should be anywhere between 5 to 95%.
The IC300DIM410 input module has no user-defined parameters, but the I/O Map will describe which I/O registers are assigned to any specific module and where the module is located on the point map. Understand that the user is unable to edit the I/O map.
