About the IC300HSC600
The IC300HSC600 unit is a high speed counter module that was made by GE Fanuc. The IC300HSC600 high speed counter module is a part of the SmartStack series and is considered one of the SmartStack Specialty Modules. The IC300HSC600 high speed counter module can typically be obtained through AX Control. You can check up on this product’s availability within our inventory at any time by looking on our website. If you want to speak to a staff member directly, you can call us during our business hours, which are 8:00 a.m. to 5:00 p.m. on weekdays.
The IC300HSC600 high speed counter module has eight configurable DC inputs and eight DC negative logic outputs with EXCP configuration.
There are a total of six selectable options on the IC300HSC600 high speed counter module. For configuration purposes and the ability to select these options, you must utilize the Configure Controller Type Dialog. If you already have one or more SmartStack modules installed onto the OCS or RCS module, then you can use the AutoConfig setting to automatically determine and set the I/O.
Please note that it is in your best interest to not install more than four SmartStack modules for every controller. Failure to do this can cause the modules to malfunction and can even cause damage to them. Also note that you must manually disable the IC300HSC600 high speed counter module through the use of a ladder code program. Failure to do this can also cause damage to the equipment and even personal injury.
