About the IC300MIX901
The IC300MIX901 device was created to be part of the SmartStack series by the company GE Fanuc. This device is considered a bipolar I/O module because it uses both analog and digital inputs and outputs. Usually, you will be able to find the IC300MIX901 bipolar I/O module in AX Control’s stock. Be sure to verify its status in our stock by looking on our website at your convenience or by contacting us via phone or email.
There are four different sections that are associated with the IC300MIX901 bipolar I/O module. These sections are the analog input, analog output, digital input, and the digital output. Each of these sections will be described below.
The IC300MIX901 bipolar I/O module has a total of four analog inputs which have four channels. The analog input range is +/-10.23 VDC and the maximum clamp current is 75 mA. The analog input section has its own digital filtering and a usable resolution of 12 bits.
This module has two analog outputs which have two channels. The output range is also +/-10.23. The conversion settling time is only 1 ms. The analog outputs’ PLC update rate is determined by the PLC scan time. In addition to that, the voltage output resolution is 12 bits.
The module possesses eight bidirectional digital inputs with one common. The input voltage range is 12 through 24 VDC. With this range set, the peak voltage rating is actually higher at 35 VDC. The channel to bus isolation is rated as being 500 VDC.
As for the last section, the module has eight digital outputs with only one common. This module’s operating voltage is 10 to 28 VDC, with 28 VDC being the peak voltage for the digital output. The maximum inrush current is 650 mA, the maximum load current is 0.5 A, and there is no minimum load.
