About the IC300OCS031
The IC300OCS031 unit is a mixed DC I/O module that was created by GE Fanuc as part of the SmartStack family of modules. The IC300OCS031 mixed DC I/O module can usually be seen inside of our inventory at AX Control. Check on the availability of the IC300OCS031 mixed DC I/O module by looking on our website at any point in time.
The IC300OCS031 mixed DC I/O module features its own 2x20 LCD display with keypad that is equipped with sixteen keys. The I/O ports are built and have no expansion. There is one RS-232 port that can support RTU slave and CsCAN.
The IC300OCS031 mixed DC I/O module comes equipped with eight inputs and one common. The input voltage range is anywhere between 12 and 24 VDC. The peak voltage is higher than this, however, at 35 VDC. The ON voltage level for this module is 9 VDC and the OFF voltage level for this module is 3 VDC. The inputs are bidirectional with an impedance of 10 kΩ.
The IC300OCS031 mixed DC I/O module also comes equipped with eight outputs and one common. The outputs are sourcing/10K pull-down type. This module has an operating voltage range of between 10 through 28 VDC, with 28 VDC being the maximum voltage. The maximum load current per channel is 0.5 A and the outputs are protected from short circuiting. In addition to that, the outputs have current sourcing available. This module does not have a minimum load that must be met by the outputs.
