About the IC300OCS035
The IC300OCS035 was originally created by GE Fanuc to be a Mini Operator Control Station (OCS). GE does not offer any type of support for this device anymore and it may prove to be difficult to locate. Please call AX Control directly to discuss the availability of the IC300OCS035.
The IC300OCS035 is a Mini OCS that was created to be a part of the GE Fanuc IC300 series. It combines an operator interface, a controller, and an I/O all into one small package. This particular model does not come with access to the DeviceNet or CsCAN networks. This OCS has 8 DC Inputs and 6 DC Relay Outputs. The inputs are 12/24 VDC with positive and negative logic. They have a max peak voltage of 35VDC and an input impedance of >10K Ohms. The 6 relay outputs are rated for 4 amps per isolated point. They have a maximum current load of 3A per channel. They have a coil voltage of 18-30VDC and use 2 commons per module.
The IC300OCS035 has a backlit LCD display that is 2x20 and a 16-key keypad. It has a spring-clamp removable terminal type. It requires a steady-state 4.8W or 200mA @24 VDC power. The OCS is 57.2 mm deep, 177.87 mm wide, and 111 mm tall. It should only be in operating conditions that have a 5-95% humidity and temperatures between 0-60 degrees Celsius. It weighs roughly 256 grams.
