IC300OCS390

About the IC300OCS390

The IC300OCS390 is a GE Fanuc SmartStack Demonstration Kit. It is no longer receiving any type of support from GE and may be difficult to find. AX Control does try to keep it in stock as a new surplus item or a refurbished part.

The IC300OCS390 is a demonstration kit for OCS3xx models of operator control stations. This kit can be used for training purposes and to explore all of the functional capabilities of an OCS.

The IC300OCS390 has a series of 3 LED lights on it. These lights are located on the right side and are labeled Fiber Ok, Run, and PWR. Below that are three other LEDs that are labeled 1, 2, 4 and Off/On Base I.D. Next to the LEDs are two OCS module connection holes and a card slot port that the OCS can plug into. There are two other connection holes on the left-hand side of the case. There are connection pins that go into these holes. On the opposite side of the OCS are four connection holes that up to 4 I/O modules can be plugged into the OCS. This entire system is meant to be stackable.

For more information about this system, please consult the product manuals and datasheets for the IC300OCS390 and for the specific OCS used with this kit. If you need a manual for this kit, let one of our knowledgeable staff members know as you are checking out and we will try to locate one for you if possible.