IC620MDR014

About the IC620MDR014

The IC620MDR014 is a Micro I/O Programmable Controller made by Ge Fanuc. It may have also been produced by Fanuc. Neither of these two companies is still producing the IC620MDR014, but AX Control still tries to keep this device available for purchase. Please check our website for availability and shipping options. 

The IC620MDR014 is a DC In, Relay Out CPU Module that was created for a GE Fanuc Micro PLC. This unit is roughly 490 grams or 1 lb. It is 80mm tall, 140 mm wide, and 76mm thick.  It has a voltage rating of 50/60 Hz and 110-220 VAC. It consumes power at 8.1-volt-amps. It has an unfused power that is available from a Vpp terminal and is 24 VDC with 75mA +8.4 mA per unused inputs.  It has a 12 MHz microprocessor clock speed. 

The IC620MDR014 has a total of 8 DC inputs that are optoisolated from its logic circuitry. This device has an 8.4 mA input current. An external device has the ability to turn on the inputs using a pull resistor to pull the input-to-ground. The inputs have a 10.8 VDC or lower on the level. They also have an 11 VDC of higher off level. These inputs have a non-adjustable maximum response time of 7mS off-to-on and 11mS on-to-off. They have a 3K ohms input impedance. 

This device also has a total of 6 N.O. output contacts that are electromechanical relays. It has 3-points per common and 3 individual points. On the independent terminals, it has a maximum voltage of 250 VAC @5 amps and a 30 VDC @ 5amps. On the common terminals, it has a 250 VAC @ 5A per common and a 30VDC @ 5A per common. It has a 10mS response time.