About the IC620MDR114
The IC620MDR114 is a Programmable I/O Controller produced by Ge Fanuc. This device may have also been sold by Fanuc depending on when it was released. Neither of these businesses still provide product support for the IC620MDR114, but AX Control tries to maintain this part in stock. Please see the website for more information about availability and delivery options.
The IC620MDR114 is a 14-point CPU I/O Unit that was made for a GE Fanuc Micro series PLC. This unit is about 140 mm wide, 76 mm thick, and 80 mm tall. It weighs approximately 490 grams or 1 lb. This component has a 12 MHz clock speed on its microprocessor. It has a 50mS @ 85 VAC power input voltage drop/ interruption. It expends power at 10-watt @ 24 VDC. It has a power supply voltage of 12-24 nominal VDCs and 10-28 VDC.
The IC620MDR114 has 6 relay inputs that have electromechanical relay N.O. contacts. The outputs have a 5VDC @ 1mA minimum applicable load. The outputs are grouped with 3 points per common and 3 individual points. The maximum voltage of these outputs is 250 VAC @ 5A and 30VDC @ 5A on independent terminals. On the common terminals, it has a maximum voltage of 250VAC @ 5A per common and 30 VDC @ 5A per common. The outputs have maximum response times of 10mS.
The IC620MDR114 has 8 DC inputs that are optoisolated from its logic circuitry. These inputs have an 8.4 mA input current. It has an on-level of 10.8 VDC or lower and an off-level of 11 VDC or higher. They have an input impedance of 3k ohms. The inputs have a 7mS off-to-on response time and an 11mS on-to-off response time.
