CQPI31200C2P

    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
GE QuickPanel Touch Screen CQPI31200C2P

AVAILABILITY:

IN STOCK
SHIPS TODAY

Sell Surplus: Have a CQPI31200C2P to sell? Sell Now
Exchange Credit: Learn more about our exchange credit program
  • Part Number: CQPI31200C2P
  • SKU: CQPI31200C2PGFP
  • Manufacturer: GE Fanuc PLC
  • Series: QuickPanel

CQPI31200C2P Technical Specifications

Manufacturer GE Fanuc Total Control
Series QuickPanel
Part Number CQPI31200C2P
Screen Size 10.4"
LCD Type TFT Color Display
Input Voltage 120 VAC
NEMA Rating Type 4X/12 IP65
Software Version QuickDesigner Version 3.7

Product Description

CQPI31200C2P

This unit is a part of General Electric’s QuickPanel lineup of touch screen models. The CQPI31200C2P is one of the many 10.5 inch touch screens, which has the largest amount of variations for workplace specifications.

The CQPI31200C2P is outfitted with a thin film transistor, with a full 8 color, LCD display. The viewing panel of the touch screen is measured at a width of 7.625 inches, and a height of 5.75 inches. The panel’s image resolution is 480 x 640 pixels.

The physical specifications of this model gives it measurements of 9.57 inches in width, 12.48 inches in height, and then 3.05 inches in depth. The overall weight of this model is 7 pounds. Alternatively, the model is 243 millimeters wide, 317 millimeters tall, and then reaches 77.47 millimeters deep.

The CQPI31200C2P model is built with the operational temperature range of 0 to 45 degrees C, or 32 to 113 degrees F. The nominal operating temperature is 40 C, or 104 degrees F. To keep this model from overheating, there is a Natural Air Convection module internally installed, rather than a forced air fan, or an external cooling unit. For storage, the CQPI31200C2P unit is able to be powered off and stored in between temperatures ranging from as low as negative 10 to 60 degrees C, or 14 to 140 degrees F.

This model is now out of production, as it and the rest of the QuickPanel models are considered outdated. The CQPI31200C2P unit has been completely refurbished, and upon purchase is covered by our extensive warranty.

Frequently Asked Questions about CQPI31200C2P

Are there fasteners that are on the Quick Panels?
Yes, there are fasteners on the Quick Panels for at least four slots and a max of 10 can be used for 10.5" or 12.1" units. Make sure that the fasteners are pulled back until they line up with the back of the attachment hole. Tighten the fasteners with a screw driver to secure the Quick Panel in place. 
What is the placement of the input and output signal line for the Quick Panel unit?
For operating circuits the input and output signal lines must be seperated from the power control cables. A shielded cable can be used, just connect the shield to the Quick Panels frame.
What connects to the tool connector on the Quick Panel units?
The Quick Panel units tool connector can have the Quick Panels Data Transfer Cable, the Memory Loader, or the Bar Code Reader can be attached. When ever you use the Bar Code Reader and use a seperate power supply, you should make sure you turn the Bar Code Reader in the ON position before actually turning on the Quick Panel Unit ON. Also, make sure that you turn the Quick Panel OFF before turning the Bar Code Reader OFF.
How do you connect the Ethernet Cable Connector?
The manual illustrates where the connection for the Ethernet Cable is located. The Quick Panel Ethernet interface transmits data at 10 Mbps and compatible with IEEE802.3. The Ethernet comes standard with the Quick Panel Ethernet series, with an Ethernet 10BASE-T connector. Not only does the Quick Panel Ethernet send data to the screen, it also communicates to PLC.
  • CQPI31200C2P Series A
  • CQPI31200C2P Series B
  • CQPI31200C2P-A
  • CQPI31200C2P-B
  • CQPI31200C2P-C
  • CQPI31200C2P-D
  • CQPI31200C2P-F
  • CQPI31200C2P-G
  • CQPI31200C2P-H

Repair Services For CQPI31200C2P

Type Lead Time Price Action
Repair Service 1-2 weeks $1408

Our highly skilled technicians can repair your CQPI31200C2P. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:

  • 48-72hr Rush Repair
  • Detailed Repair Reports
  • AX Control Certificate of Warranty

AX Control Warranty Info

All products we sell are backed by our unparalleled warranty. A warranty certificate will be provided with your order upon request.
All PLCs, HMIs, and Turbine Control Boards: 3 Years
All AC/DC and Servo Drives: 2 Years
All Motors: 1 Year
Learn More