CQPK2D100L2P

    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
GE QuickPanel Touch Screen CQPK2D100L2P

AVAILABILITY:

IN STOCK
SHIPS IN 3-5 DAYS

Sell Surplus: Have a CQPK2D100L2P to sell? Sell Now
Exchange Credit: Learn more about our exchange credit program
  • Part Number: CQPK2D100L2P
  • SKU: CQPK2D100L2PGFP
  • Manufacturer: GE Fanuc PLC
  • Series: QuickPanel

CQPK2D100L2P Technical Specifications

Manufacturer GE Fanuc Total Control
Series QuickPanel Jr.
Part Number CQPK2D100L2P
Screen Size 5.7"
LCD Type Monochrome Display
Input Voltage 24 VDC
NEMA Rating Type 4X/12 IP65
Software Version QuickDesigner Version 3.7

About the CQPK2D100L2P

CQPK2D100L2P

This is the CQPK2D100L2P module, from a General Electric series of human/machine touch screen interface modules. This series of units are a lineup of varying sizes, hardware and software specifications. These units are now out of date, and now longer in production from General Electric’s division of industrial automation technology. Our technical crew at AX Control are able to fully restore and repair these units, and offer our 1 to 3 year warranty coverage for your purchase.

The CQPK2D100L2P is a part of the QuickPanel Junior series of touch screens, with a 5.7 viewing panel (when measured diagonally), and has the official measurements of 8 inches in width by 6 inches in height. The pixel resolution of this unit is standard for touch screen interfaces on this unit is 640 by 480 square pixels. The touch screen itself is able to display a large number of graphics due in part to the large application memory installed. The 4 megabytes of memory are formatted into Flash EPROM memory. The CQPK2D100L2P is designed with a thin film transistor module, and the video graphics display renders the information in monochrome gray and white.

The CQPK2D100L2P is designed with standard physical dimensions to accommodate a viewing screen of its size. The height is measured at 6.69 inches (170 mm), while the width is 8.46 inches (215 mm), and its depth reaches up to 2.36 inches (60 mm). The approximate weight of this unit is 5.5 pounds, or 2.5 kilograms.

Frequently Asked Questions about CQPK2D100L2P

What are the port types on CQPK2D100L2P?
There are several different ports consisting of an Option Module Connector Port, Serial Interface Port, Download Port, and Power Terminals. The serial port never is isolated, so you have to connect a signal ground to the terminals, if not done it can cause damage to the RS422 circuit. Units that have Ethernet equipped in the interface must have a specific port number of +10 or higher than the specified value or the Ethernet can be disabled. The download port is obviously used to download files to the target display from your computer, but this port can also be used to print alarm messages. The serial port interface connects the QUICKPANEL jr. to the PLC but because the download port signals TTL, the serial port should never be directly connected to the download port. 
What type of LCD is used in the Quickpanel CQPK2D100L2P?
The CQPK2D100L2P uses a 6 inch Monochrome LCD.
Does the CQPK2D100L2P Quickpanel have any internal fans?
The Quickpanel Total Control CQPK2D100L2P does not have internal fans as it is cooled by Natural air circulation. There is no need for fans or and forced air cooling, as long as the operating temperature stays near 40 degrees Celcius or lower.
What type of power source is used with the Quickpanel Jr. CQPK2D100L2P?
The power sourced used for the Quickpanel CQPK2D100L2P is 500 ma @ 24V.
What is the LED light indicating?
The LED is a Stable Power Indicator. The powerup sequence is a series of operations initiated by the internal electronic cirucits when power becomes stable.
Why is the LED orange?
When the backlight CCFL tube eventually fails, the power indicator on the front of the unit turns Orange and the touch screen is disabled.
  • CQPK2D100L2P Series A
  • CQPK2D100L2P Series B
  • CQPK2D100L2P-A
  • CQPK2D100L2P-B
  • CQPK2D100L2P-C
  • CQPK2D100L2P-D
  • CQPK2D100L2P-F
  • CQPK2D100L2P-G
  • CQPK2D100L2P-H

Repair Services For CQPK2D100L2P

Type Lead Time Price Action
Repair Service 1-2 weeks $1091

Our highly skilled technicians can repair your CQPK2D100L2P. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:

  • 48-72hr Rush Repair
  • Detailed Repair Reports
  • AX Control Certificate of Warranty

AX Control Warranty Info

All products we sell are backed by our unparalleled warranty. A warranty certificate will be provided with your order upon request.
All PLCs, HMIs, and Turbine Control Boards: 3 Years
All AC/DC and Servo Drives: 2 Years
All Motors: 1 Year
Learn More