QPH-2D100-S2P

About the QPH-2D100-S2P

QPH-2D100-S2P

This QuickPanel model is classified under the designation ID “QPH-2D100-S2P.” From General Electric, this series of touch panel units are designed as replacement models for informational displays that are utilized without the need of any physical buttons or switches. This efficiently makes for a much better tool in the industrial workplace, and it’s easy for any user to operate, regardless of experience using this product.

The QuickPanel models are all out of production, and often regarded as obsolete when compared to the hardware being developed today. However, once this model has been completely refurbished and optimized, it is ready and able to stand up to the quick pace and qualifications needed for a piece of hardware to work in today’s industrial line. Once purchased from us, we at AX Control offer exclusive, extensive warranty coverage, and we guarantee no piece of equipment you buy will reach you dead on arrival.

The QPH-2D100-S2P model is a part of QuickPanel’s Junior subcategory. Its 6 inch sized touch screen panels are measured to be 5 inches, or 127 millimeters, in width, and  4 inches in height, or 101.6 millimeters. The image resolution that this model provides is 240 pixels by 320 pixels. This model is outfitted with a full color LCD display, and a thin film transistor module.

It’s powered by an intake of 20 to 27 volts of direct current, and while in use, there’s a power consumption of 50 volt-amperes, at most, and it’s built with a power immunity capability that helps if a power failure occurs, and it lasts up to 20 milliseconds.

The operational temperature that this model needs is between 0 and 45 degrees C, and is wider when the model is in storage, from -20 to 60 degrees C.