About the QPI-2D100-E2P
QPI-2D100-E2P
This variation of the QuickPanel touch screen interface is the QPI-2D100-E2P. This model is one of their 9 diagonal inch touch screens, outfitted with an electroluminescent display.
The QuickPanel series were all originally produced by the industrial automation division of General Electric. This series is of course, entirely out of production and classified as obsolete now. However, automation suppliers have restored and repaired these models to operate at peak functionality. But here at AX Control, we also offer a phenomenal warranty coverage for up to 3 years. This warranty offers a replacement should you purchase deal with any wear and degradation of the QPI-2D100-E2P’s materials.
The viewing area of this model’s touch screen has a width of 10.2 inches/259 mm, and a height of up to 7.92 inches/201 mm. The image resolution of the graphic information display is 640 by 400 pixels.
The expanded application memory of 2 megabytes allows for even more detailed diagnostic module screens to be displayed on the screen for the operator to access. The memory is compacted into a Flash EPROM format; erasable, programmable, read only memory. The hardware that comes integrated into this QuickPanel module is a download port, and a serial I/O port.
The frame of the QPI-2D100-E2P model is protected by a NEMA 4X/12 rated case. The optimal temperature range that the workplace should be is between 0 to 50 degrees Celsius, or 32 to 122 degrees Fahrenheit. It is also able to stand a range of relative humidity between 20 to 85 percent without developing any condensation of its own.