About the QPI-2D100-S2P
QPI-2D100-S2P
This unit of the QuickPanel lineup is the QPI-2D100-S2P: one of their 10.5 inch touch screen modules. These human/machine interface panels were all built and produced by the automation division of General Electric. These touch screen models are all out of production. Once top of the line, these units are largely classified as obsolete models. AX Control’s technicians are able to provide you with completely restored, fully optimized inventory from the QuickPanel models.
The QPI-2D100-S2P is a 10.5 diagonal inch touch screen panel, with a resolution of 32 x 24. The image resolution for the graphic displays is 640 x 480 pixels. The viewing area is measured with a width of 8.48 inches/ 215 millimeters, and a height of 6.32 inches/160.5 millimeters.
The graphical unit is outfitted with a super twisted nematic, full color LCD display. The power supply is between the voltage range of 20.4 to 27.6 volts of direct current, or 50 to 60 hertz. The average maximum power that the QPI-2D100-S2P unit consumes while in use is 50 volt-amperes at maximum. Should a power failure occur that shuts the interface down, the unit is outfitted with a power failure immunity of 20 milliseconds.
The QPI-2D100-S2P’s physical dimensions are measured at a width of 12.48 inches/317 millimeters, a height of 9.57 inches/243 millimeters, and a depth of 3.05 inches/77 millimeters. The standard weight of the unit is 6.6 pounds, or 3 kilograms.