About the QPI-2D101-S2P
QPI-2D101-S2P
The QPI-2D101-S2P module is a part of the QuickPanel lineup of touch screen units from General Electric and their division of industrial automation. This series is now entirely out of production from that division of GE, however, and is widely regarded as being an obsolete setup of touch screen HMI. After our team here at AX Control have fully refurbished and restore these units, we can gladly say that isn’t the case, that the QPI-2D101-S2P models have been fully optimized to be the best models of graphic informational displays for users at an industrial, automated work line.
The QPI-2D101-S2P unit is one the 10.5 inch touch screen Human/Machine interfaces. The visual systems are outfitted with a super twisted, nematic LCD display. The graphics are shown in completely full color, with 8 solid/flashing mode colors.
This model of the QuickPanel series is built with a 8.48 inch wide and 6.32 inch tall viewing area, measured diagonally at 10.5 inches. The image resolution is 640 x 480 pixels (height x width). The physical frame of the QPI-2D101 model is outfitted with a 9.57 inch height, a 12.48 inch width, and a 3.05 inch depth.
The internal specifications of this model include a Natural Air Convection cooling unit, and the power intake of the unit is a voltage range between 20.4 volts of direct current and 27.6 V/DC, or 50 to 60 hertz. The power consumption rating is up to 50 volt-amperes at maximum. The internals are insulated with 10 M( @ 500 V/DC), and a power failure immunity during a power outage that lasts up to 20 milliseconds at maximum.
