About the QPI21100C2P
QPI21100C2P
This model of the QuickPanel series is given the designation of QPI21100C2P. These touch screen units were all developed and produced by the industrial automation branch of General Electric. Of course, given that these touch screen units are considered obsolete, these models have been restored and fully optimized for absolute success. AX Control can cover your purchases with a well-rounded, extensive warranty deal, and you can take advantage of our Exchange Credit Program to lower the cost of your purchase.
This model of the QuickPanel 10.5 inch touch screen is built with a width as far as 12.48 in (317 mm), a length of 9.57 in (243 mm), a depth of 3.05 in (77 mm), and then a weight of 3 kg, or 6.6 lbs. The visual hardware is set up with a thin film transistor module, and graphics are shown in full color.
Environmentally, the QPI21100C2P unit has an operating temperature range of 0 to 45 degrees Celsius, or 32 to 122 degrees Fahrenheit. This unit is able to handle a wide range of relative humidity as well without producing any condensation: 30 to 85 percent. This prevents any possible corrosion that may damage it.
The storage temperature and humidity ranges are wider than when the model is in use, with the standard temperature range being negative 10 to 60 degrees C, and the relative humidity from 5 to 85 percent.
The internal details that allow the QPI21100C2P module to run smoothly give it the required power intake of 85 to 132 volts of alternating current, while consuming up to 50 volt-amperes. A 20 millisecond power failure immunity is installed as well, in case of a blackout occurring.