About the QPI21100E2P
QPI21100E2P
This unit of the QuickPanel series of products is the QPI21100E2P. This one is a 9 diagonal inch touch screen panel. The general specifications make it outfitted with an amber electroluminescent display, which provides an incredibly high contrast ratio to allow users to operate the QPI21100E2P while in an intensely lit work area.
The viewing area for this unit has a height of 7.92 inches, or 201 millimeters, and then a width of 10.2 inches, or 259 millimeters. The graphical information display is shown in an image resolution of 640 by 400 pixels. This unit is equipped with an application memory capacity of up to 2 megabytes. These 2 MB are formatted into Flash capable, erasable, programmable, read only memory (EPROM).
The dimensions of the QPI21100E2P module are standard for this size of touch screen interface: the depth of the product requires an integration port that’s 2.23 inches deep, also measured as 56.5 mm, so your model can successfully be connected. The width of this touch screen panel is 10.79 inches (or 274 mm), while it is as tall as 8.5 inches (or 216 mm).
The external hardware integrates a pair of entry ports for connectors; a serial I/O port, and a download port. The QuickPanel series are able to connect with every major type of programmable logic controller and a number of network systems.
AX Control is able to offer an extensive warranty coverage for your purchase, with a range of up to 3 years (depending on the type of product it is) to protect from wearing down from its intended use.