DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
❮
❯
AVAILABILITY:
IN STOCK
SHIPS TODAY
Manufacturer | GE Fanuc Total Control |
Series | QuickPanel Jr. |
Part Number | QPJ-2D100-L2P |
Screen Size | 4.7" |
LCD Type | Monochrome Display |
Input Voltage | 24 VDC |
NEMA Rating | Type 4X/12 IP65 |
Software Version | QuickDesigner Version 3.7 |
QPJ-2D100-L2P
This model is one of several out of the QuickPanel series of touch screen panels. These Human/Machine interface modules are outfitted with a 5 inch screen, lit with a monochrome, LCD display. The ID number for this catalog of products is “QPJ-2D100-L2P.”
The QPJ-2D100-L2P model is outfitted with these general specifications. Mechanically, it has dimensions that make it 5 inches tall, 6.75 inches wide, and has a depth of 2.125 inches. The standard weight for this miniature touch screen module is only 1.5 pounds. The resolution displays an image that’s made of 240 x 320 pixels, with a viewing area that has a width of 4 inches and a height of 3 inches. The image is captured in monochrome, composed of flashing white and gray.
The QPJ-2D100-L2P’s environmental specifications allow it to operate in temperatures ranging between 0 to 50 degrees Celsius, or 32 to 122 degrees Fahrenheit. This model is also able to operate without producing any condensation, within a range of relative humidity that’s between 5 to 85 percent.
Electrically, the internal systems of the QPJ-2D100-L2P requires an operating voltage of direct current, ranging between 20.4 to 27.6 volts. The maximum about of power that this touch screen consumes is up to 12 watts, and has an immunity with up to 20 milliseconds of power failure. This model is able to withstand up to 1500 V/AC, (at 10 milliamperes over 1 minute, max), before overloading. The insulation is at 10 M (@ 500 V/AC)
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $1331 |
Our highly skilled technicians can repair your QPJ-2D100-L2P. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved