QPL-2D200-C2P

About the QPL-2D200-C2P

QPL-2D200-C2P

This variation of the QuickPanel human/machine touch screen interface modules is the QPL-2D200-C2P. Regarding its origins, these human/machine interface units are all productions of the industrial automation division of General Electric. These models are all entirely out of production, but if you purchase anything from us at AX Control, then you’re guaranteed inventory that has been completely refurbished and optimized. None of your purchases will arrive on your doorstep in any other condition.

The QPL-2D200-C2P module is one of the 12.1 diagonal inch interface units, with a viewing panel that measures out with dimensions of 9.8 in x 7.35 in (width x height). The image resolution of the graphic display is 600 x 800 pixels. The display of this model is equipped with hardware such as a thin film transistor. The QPL-2D200-C2P unit is designed to display the information graphics in full color.

The dimensions that the model is designed to have are standard for such a large touch screen panel. The width is as wide as 13.62 inches, and the height goes as tall as 10.70 inches, and its depth reaches as far as 4.45 inches (alternatively, 346 mm x 272 mm x 113). The unit’s weight is 8.4 pounds, or 3.81 kilograms.

The model is powered by a nominal intake range of 20.4 to 27.6 volts of direct current, or between 50 and 60 Hz. While being operated, the unit consumes up to 50 volt-amperes, at maximum. Should the unit become disconnected before powering down, or if a blackout knocks the power out, the QPL-2D200-C2P unit is built with a power failure immunity. This immunity capabilities last up to 20 milliseconds before shutting down.