IC693UDR005

About the IC693UDR005

The IC693UDR005 was built by General Electric Fanuc as part of the Series 90 Micro product line. Its main purpose is for software configuration and application. This is easily made by the built-in features and tools that come standard within this product line. Such tools are features like its architecture that manages the memory function and makes sure to prioritize the execution for the 80188 microprocessor. 

Additionally, this machine also uses an H8 Microprocessor which allows basic tasks such as diagnostic routines Input and Output (I/O) scanners. There is also the 90-30 main series PLC that the IC693UDR005 uses to run its application program to take charge of the end process where the PLC is used. This in turn is used by a dedicated ISCP or Instruction Sequencer Coprocessor. 

The IC693UDR005 normally uses a standard program sweep mode to operate. Other operating modes include: Stop with I/O Disabled, Stop I/O Enabled, and Constant and Sweep mode. All of these operation modes are run by an external event, as well as application and configuration settings. Finally, the IC693UDR005 was made to ensure a cost-effective platform that works with low I/O count applications. It can be easily seen now that this product was made to effectively run software configuration as well as applications. Please feel free to contact AX Control with any questions in regards to buying or selling such products or the like.