IC609EXP110

About the IC609EXP110

The IC609EXP110 module is an expansion unit that was made for a Series One Junior CPU model, both of which were created by GE Fanuc. The IC609EXP110 expansion unit is no longer being produced by GE Fanuc. Despite that, AX Control usually has this product in stock, which is notated on this page of our website.

The IC609EXP110 expansion unit was made to be connected with the IC609SJR110 Sink I/O CPU unit so that its capabilities could be expanded. If you would like to learn more about that product and find out purchasing information for it, then you can click on the link above to find its page on our website. The IC609EXP110 expansion unit, like the unit that it is meant to be connected with, requires 115 VAC of power and is a sink I/O unit that is rated at 24 VDC. 

The IC609EXP110 expansion unit has fast blow fuses that are rated at 5 Amps. The fast blow fuses are installed in the unit by using mounting clips.

In the event that you need to troubleshoot the IC609EXP110 expansion unit or any other Series One Junior devices, then you should use the programmer tool, which is the main diagnostic unit. This tool is key in checking the status of a Series One Junior device and determining if any corrective action needs to be taken. In addition to that, the IC609EXP110 expansion unit also has a few status indicator LEDs that will let the operator know if the device is running as intended or if it needs to be serviced with repairs. 

The IC609EXP110 expansion unit has a total weight of about 4.27 lbs. or 1.94 kg.