IC609SJR120

About the IC609SJR120

The IC609SJR120 module is a programmable logic controller which was designed and produced for the Series One Junior family of PLCs and similar products by GE Fanuc. This device has had its production halted by GE Fanuc, but AX Control likely has it available for purchase, which is shown on here on our website. You can also call or email us for more information on its availability.

The IC609SJR120 PLC has a faceplate with numerous parts that will prove useful to the person who is operating it. In the bottom right part of the faceplate, you will see a display screen with a total of 24 indicator lights on its right side. In the top left corner of this faceplate, there are four more indicator lights that are designed to indicate the status of the whole unit rather than just one part of it. These lights are labeled as “RUN,” “BATT,” “CPU,” and “POWER.” The most important part of the IC609SJR120 PLC are the terminals that are located on both the top and bottom of the device. Both sets of terminals are rated as being 24 VDC, with the top ones being for the input and the bottom ones being for relay output.

The fuses that the IC609SJR120 PLC uses miniature and normal blow. The first one is rated at 2 A while the other two are rated at 5 A. For installation purposes, you must use the fuse mounting clips.

The IC609SJR120 PLC weighs 3.90 lbs. or 1.77 kg.