About the IC800SLA2502
IC800SLA2502 is a part of the SL Series of servo amplifiers manufactured by GE Fanuc. This device is a 2500-Watt, 230 V AC servo amplifier and features V-series servo components. The V-series differs from the Z-series of SL servo amplifiers in that it has a larger number of signals and is intended for servos with 1,000-5,000-Watt ratings. The IC800SLA2502 amplifier is compatible with the following two SL series motors: IC800SLM250M2KE25 and IC800SLM250M2XE25. The amplifier features a rated speed of 3000 RPM and has an encoder resolution of 2500 lines. The average power dissipation of the device when functioning at the rated output is 170 W. IC800SLA2502 has a continuous current of 15.9 and peak current of 68. The peak power of the IC800SLA2502 is 9627 Watts with an internal regenerative discharge resistor, not included with the device.
IC800SLA2502 has a 50-pin interface connector and utilizes a three-phase power supply. The amplifier can only be used in appropriate environments, with careful consideration of temperature, ventilation, contamination, and light. This device functions at an ambient temperature of 0-40 degrees Celsius and must be derated if functioning at higher temperatures. To ensure adequate ventilation, amplifiers should be mounted vertically and should be grounded using the ground terminals on the device. It is also recommended that each amplifier has an emergency power shut off with an electric circuit breaker. Improper wiring of the device can cause harm to both amplifier and motor, and extreme caution should be used during setup.
